Watercolor Trio Thanks

This card falls under the Clean and Simple category.  I made this card when Stampin' Up's new colours came out.  That was a while ago so I don't remember whether or not I followed the sketch challange on the Clean and Simple Blog.  If you want great sketches for quick cards check out that blog HERE.

Supplies:

Stamps:  Watercolor Trio, Great Friend, Thank You Kindly

Paper:  Whisper White, Marina Mist, Basic Black

Ink:  Whisper White Craft, Basic Black

Accessories:  White Embossing Powder, Black Gingham Ribbon, Dimensionals

4.25 x 5.5 card

Thanks for stopping by.

Once is Enough?

Not with this technique!! :)

Here is another card using the Reinker Watercolour Technique.

Supplies:

Stamps:  Fifth Avenue Floral

Paper:  Rose Red, So Saffron, Whisper White, Shimmery White

Ink:  Basic Black, Whisper White, Rose Red, Pretty in Pink and So Saffron Reinkers

Accessories:  Distresser, Mat Pack, Paper Piercer, Dimensionals, White Embossing Powder, Rhinestones

4.25 x 5.5 card

Thanks for stopping by.

September Stamp Club

Watercolouring with Reinkers 

When I first saw cards using the watercolouring technique using reinkers (sometimes called Reinker Spread Technique) it was one of those things I had to try immediately.  And it is so much fun!

Patty Bennett, a Stampin' Up! demonstrator has a great tutorial video on how to make the flowers, so I won't repeat her instructions in this post.  Click HERE to see her tutorial.

The rest of the card goes as follows:

1.  Create flower first so that it has time to dry.  Then cut around embossed line.

2.  To create leaves, use the Square Lattice Folder and Big Shot to emboss Old Olive card stock.  Now use the Little Leaves Sizzlet on the embossed Old Olive card stock.  Cut three.  Tip:  By making your leaves in this order, it gives a very subtle texture to the leaves.  If you want more texture, cut leaves first and then emboss.

3.  Stamp Sentiment on Very Vanilla card stock using Rose Red ink.

4.  Use Scalloped Trim Border Punch on Pumpkin Pie card stock strip.  Adhere under the Very Vanilla card stock. 

5.  Adhere Sweet and Sour DSP to Pumpkin Pie card stock.  Adhere Very Vanilla and Pumpkin Pie border.  Add Ribbon.  Use Tombo Glue to adhere leaves.  Cut out dry rose and use dimensionals to pop up over the leaves.

Tips: 
I tried to dry my rose with the heat gun.  I found I had to be extra careful not to push the ink everywhere.  It also tended to curl the card stock. 

Lean the rose up against something as it is  air drying so that the water runs to the bottoms of each section.  This gives it more of a watercolour effect.

Try this technique on Glossy White card stock.  It works but gives a different look.

Dimensions:

Rose Red card base:  8 1/2 x 5 1/2

Pumpkin Pie:  4 1/8 x 5 3/8

DSP:  4 x 5 1/4

Very Vanilla:  2 x 5 1/4

Pumpkin Pie Strip:  for Scalloped Punch

Shimmery White card stock:  for Fifth Avenue rose

Old Olive scraps:  for leaves

Supplies: 

Stamps:  Fifth Avenue Floral

Paper:  Sweet and Sour Specialty DSP, Rose Red, Pumpkin Pie, Very Vanilla, Shimmery White card stock

Ink:  Rose Red, Rose Red, Pretty in Pink and Pumpkin Pie Reinkers, Whisper White

Accessories:  5/8" Old Olive Grosgrain Ribbon, Big Shot, Square Lattice Embossing Folder, Little Leaves Sizzlet Die, White Embossing Powder, Water Spritzer, Aquapainter, Scalloped Trim Border Punch, Dimensionals

4.25 x 5.5 card

 Pocket Silhouette Gift Card with Envelope

Directions:

Envelope:  Run Naturals White card stock through Big Shot with the Scalloped Envelope die.  To make the patterned paper inside of card, place DSP on the upper half of the Scalloped Envelope die.  Glue DSP to inside of Envelope.  Let dry before folding.  Tip:  If you fold the flap before the DSP is dry, it will move on you.

Card:

1.  Fold Natural White card stock in half making sure it folds to a card of 2 x 3.

2.  Colour the flower stamp from Pocket Silhouettes set with Old Olive, Cherry Cobbler, Melon Mambo and Pink Pirouette Markers.

3.  Stamp Sentiment in Old Olive ink

4.  Punch out flowers using Itty Bitty Punch Pack in Melon Mambo, Pink Pirouette and Cherry Cobbler card stock.  Bend flowers around finger tip to give it a bit of dimenion.  Glue to stamped image.

5.  Add Basic Pearl Jewels to center of punched flowers.  Tip:  I find the best way to pick up the pearls (so they don't go flying) is to move it slightly off its spot with your finger tip and then pick it up with your tweezers.

Dimensions:

Naturals White Card Base:  3 x 4

Naturals White Envelope:  4 1/4 x 5 1/2

Old Olive DSP:  2 1/2 x 3 1/4

Melon Mambo Scrap

Cherry Cobbler Scrap

Pink Pirouette Scrap

Supplies:

Stamps:  Pocket Silhouettes, Tiny Tags

Paper:  Old Olive DSP, Naturals White, Pink Pirouette, Melon Mambo, Cherry Cobbler

Ink:  Old Olive, Pink Pirouette, Cherry Cobbler and Old Olive Markers

Accessories:  Big Shot, Bigz Scalloped Envelope Die, Basic Pearl Jewels, Tweezers, Tombo Multi Liquid Glue

2 x 3 Card and 2 1/4 x 3 1/4 Envelope

Thanks for stopping by.

August Stamp Club

For You Flower

I just LOVE everything about the designer series paper used on this card. I love the colours used as well as all the patterns on EACH SIDE of the paper. That is unusual for me. I will definitely be using up my whole pack very quickly.

Directions

1. Punch Whisper White strip with Dotted Scalloped Border Punch. Tape Scallop and the two pieces of patterned paper together. Tie Ribbon around and adhere to Early Espresso card base.

2. Using the For You Flower stamp, ink in Certainly Celery and stamp on Whisper White card stock. Punch out using the XL Fancy Flower Punch. YAY! YOU DON'T NEED TO CUT THE FLOWER OUT BY HAND!!

3. Clean stamp and colour the words in the circle with Baja Breeze, Tangerine Tango and Early Espresso Markers. Stamp on Whisper White card stock and punch out using the 1 3/8" Circle Punch. TIP: If you take a while to colour, you can "huff" on your stamp to re-moisten the ink before stamping on your card stock. Tape Circle to the center of the Celery Flower.

4. Build a Brad: Stamp flower from Itty Bitty Bits in Baja Breeze ink and punch out with the 1/2" Circle Punch. Add a glue dot to the back of the circle. Adhere to the part of the Build a Brad with the "stems". Add the Clear top of the brad. This has adhesive on it already so you do not need to add any more. Punch hole in the For You Flower with 1/16" Hand held punch and add brad.

5. Complete card by punching two Small Ovals out of Greenhouse Gala DSP. Add a dimensional to one end of the oval. Add dimensionals to the For You Flower. Stick Flower and Leaves to card.

Dimensions:

Early Espresso Card Base: 4 1/4 x 11

Greenhouse Gala DSP: 4 1/4 x 1, 4 1/4 x 2 1/4 and Scraps for leaves

Whisper White Strip and Scraps

Supplies:

Stamps: For You Flower, Itty Bitty Bits

Paper: Greenhouse Gala DSP, Early Espresso, Whisper White

Ink: Certainly Celery

Accessories: White 5/8" Grosgrain Ribbon, Dimensionals, Glue Dot, Build a Brad, Baja Breeze, Early Espresso and Tangerine Tango Markers, 1/16" Handheld Punch, Small Oval Punch, 1 3/8" Circle Punch, XL Fancy Flower Punch, 1/2" Circle Punch, Dotted Scalloped Border Punch

4 1/4 x 5 1/2 card

Itty Bitty Bits with Rich Razzleberry

1. Stamp sentiment on on Whisper White card stock with Basic Black ink. Use a Stamp-a-ma-jig if you want perfect placement. :)

2. Stamp Itty Bitty Bits with Certainly Celery, Rich Razzleberry and Tempting Turquoise ink. Punch out with Itty Bitty Punches and glue to Whisper White card stock.

3. Score the long side of Tempting Turquoise card stock at 3". Punch the side closest to the score line with the Scalloped Border Punch. (When folded this should make a 3 x 3 square.) Adhere completed Whisper White square to inside and fold Turquoise scallop up adhering in place.

4. Add ribbon to bottom edge. You might have to add a bit of adhesive to keep it in place. Tie the ends with embroidery thread and add Itty Bitty Button. You can either tie it on with the piece of thread you used to tie the ribbon or use two separate pieces for each, using a glue dot to attach the button to the top of of the ribbon.

Dimensions:

Rich Razzleberry Card Base: 5 1/2 x 8 1/2

Tempting Turquoise: 3 x 4 1/2 (score at 3")

Whisper White: 2 3/4 x 2 3/4

Whisper White Scraps

Supplies:

Stamps: Itty Bitty Bits, Thank You Kindly

Paper: Rich Razzleberry, Tempting Turquoise, Whisper White

Ink: Basic Black, Rich Razzleberry, Certainly Celery, Tempting Turquoise

Accessories: Polka Dot Ribbon (retired), White Embroidery Thread, Itty Bitty Buttons, Glue Dot, Scalloped Border Punch, Itty Bitty Shapes Punch Pack, Glue Pen

4 1/4 x 5 1/2 card

Thanks for stopping by.

Three Cards from a Stack Party

Pedaling Past

This set, Pedaling Past, is from the SU Summer Mini Catalogue. I love this set and it was one of the first I bought from this mini. I think it is very versatile and can be used for a variety of occasions.

The image is stamped on Watercolour Paper and then coloured in with ink and an aquapainter or blender pen. I find that the blender pen gives more of a marker-like effect to the image whereas with an aquapainter it works more like a paintbrush. Also, with an aquapainter, because it feels more like a paintbrush, you seem to have less control and might go over the lines. So I guess it depends on what kind of look you want.

Supplies:

Stamps: Pedaling Past, Teeny Tiny Wishes
Paper: Taken With Teal (retired), Pumpkin Pie, Watercolour Paper, Sweet Pea DSP (retired)
Ink: Taken With Teal, Pumpkin Pie, Chocolate Chip, Black Stazon
Accessories: Dimensionals, Orange Eyelets, Crop-o-dile, Corner Rounder Punch

4.25 x 5.5 card

Friends Never Fade in Blue

Very simple but lots of layers

Supplies:

Stamps: Friends Never Fade
Paper: Whisper White, Bordering Blue (retired),
Ink: Bordering Blue, Night of Navy
Accessories: Navy Ribbon (Gale's), Dimensionals

4.25 x 5.5 card

Itty Bitty Bits

The only thing fussy about this card is gluing on the Itty Bitty Bits. Other than that, this is another pretty quick card. Please note that the Turquoise card stock was place only partially in the folder to emboss about 2/3's of it.

Supplies:

Stamps: Itty Bitty Bits, A Little Birthday Cheer
Paper: Tempting Turquoise, Rich Razzleberry, Whisper White
Ink: Tempting Turquoise, Rich Razzleberry, Old Olive, Basic Black
Accessories: White Embroidery Floss, Turquoise Ribbon (Gale's), Perfect Polka Dots Embossing Folder, Big Shot, Scalloped Border Punch, Three Punch Pack, Two-way Glue Pen

4.25 x 5.5 card

Thanks for stopping by.

July Stamp Club

Friends Never Fade with Presto Patterns DSP

Using the Presto Patterns Designer Series Paper is like having the paper already embossed for you. The embossing is already completed for you. If you do not have this type of paper, you can always have this look by using the Emboss Resist Technique.


1. Ink up brayer with Certainly Celery ink and brayer over the Presto Patterns card stock. Keep inking brayer and rolling over paper until the colour is even.


2. Stamp ornate flower from Friends Never Fade stamp set with VersaMark ink on Soft Suede card stock and brayered Presto Patterns DSP.


3. Wipe the embossing buddy over the brayered Presto Patterns DSP and sprinkle with Iridescent Ice Embossing Powder. Heat with heat gun.


4. On "pineapplely" looking stamp :) from Friends Never Fade stamp set, colour stamp with Certainly Celery and Pink Pirouette Markers. Don't forget to huff on it; then stamp on Whisper White square.


5. Punch Pinking Hearts Border on Pink Pirouette card stock strip.


6. Adhere all pieces to card base. By the way, I find that the Presto Patterns DSP needs lots of tape since it is a thicker paper.


Dimensions:


Whisper White Card Base: 5 1/2 x 8 1/2
Soft Suede: 3 1/2 x 4
Pink Pirouette Strip: 1 x 4
Pink Pirouette: 1 7/8 x 1 7/8
Whisper White: 1 3/4 x 1 3/4
Presto Patterns DSP: 2 x 4 3/4


Supplies:


Stamps: Friends Never Fade
Paper: Whisper White, Soft Suede, Pink Pirouette, Presto Patterns DSP

Ink: Certainly Celery, VersaMark
Accessories: Certainly Celery Marker, Pink Pirouette Marker, Brayer, Heat Gun, Iridescent Ice Embossing Powder, Pinking Hearts Border Punch

4.25 x 5.5 card

Paper Bag Purse

I found the instructions to this purse at Inking Idaho. They are very clear with some photos to follow so I am not going to repeat these great instructions. Click on Inking Idaho to get there.


One change it did make was to cut the paper bag to slightly less than 4 1/4" tall. I found that it fit inside the card stock better.

Rectangle Image:

1. Stamp "Friends are like flowers" stamp in So Saffron. Cut carefully and adhere to Certainly Celery card stock.

2. Stamp two flowers on Whisper White scrap card stock. One in Pumpkin Pie and the other in Certainly Celery. Cut out the entire Pumpkin Pie flower and only the center of the Certainly Celery Flower.

3. Pop up flower and center with dimensionals. Attach to front flap of bag making sure you put adhesive ONLY ON TOP HALF of rectangle.

4. Place a velcro dot (I found mine at the dollar store) behind front flap. HINT: Stick the two sides of the velcro dot together. Stick the connected dot to the inside flap and press down. Carefully peel apart the velcro dot and they should be sticking on opposite sides of the purse and flap.

Dimensions:


Paper Bag: 4 1/4" tall
Certainly Celery: 4 1/4 x 5 1/5
Certainly Celery: 6 1/4 x 5 1/2 (score at 4 1/4)
DSP: 4 x 5 1/4 (cut two) and 1 3/4 x 5 1/4
Certainly Celery: 1 3/4 x 2 3/8
Whisper White scraps: for Friends Never Fade rectangle and flowers


Supplies:


Stamps: Friends Never Fade
Paper: Waterhouse Gala Designer Series Paper, Certainly Celery, Whisper White
Ink: Certainly Celery, Pumpkin Pie, So Saffron
Accessories: Crop-o-dile, Dimenionals, Certainly Celery 5/8 Grosgrain Ribbon, Glue Dots, Velcro Dot, Scor-Pal


Thanks for stopping by.

June Stamp Club

Watercolor Trio with Smooch Spritz

Directions:

1. Stamp the three flower images in Certainly Celery, Close to Cocoa and Taken with Teal on the Natural White card stock. Each flower has its own ink colour.

2. Using the Log Cabin Smooch Spritz spray the stamped image carefully. Spray the Kraft card base with Log Cabin Smooch Spritz as well.

I found that I needed to be careful when I sprayed with the Log Cabin SS. I pressed with a light touch so that I wouldn't make a big blotch over my stamped image. (Maybe I have a faulty spray bottle. Let me know if you do not have this problem.) Practice on a scrap first.

3. Spray stamped image with Vanilla Smooch Spritz. I squirted quite generously. Set aside to dry.

4. Using the Scalloped Trim Border Punch, punch one edge of Close to Cocoa card stock.

5. Tape Close to Cocoa, Taken with Teal and stamped Naturals White card stock together. Tie a piece of Early Espresso Taffeta Ribbon (NEW!!) around these layers. Adhere to Kraft card base.

Dimensions:

Kraft Card Base: 5 1/2 x 8 1/2

Close to Cocoa: 3 3/4 x 5 1/4

Taken with Teal: 3 5/8 x 4 7/8

Naturals White: 3 1/2 x 4 3/4

Supplies:

Stamps: Watercolor Trio

Paper: Kraft, Close to Cocoa, Taken with Teal, Naturals White

Ink: Certainly Celery, Close to Cocoa, Taken with Teal

Accessories: Log Cabin and Vanilla Smooch Spritz, Scallop Trim Border Punch, Early Espresso 1/4" Taffeta Ribbon

4.25 x 5.5 card

Petal Pizzazz with Glitter and Sticky Cuts

I have been meaning to use the Sticky Cuts for a while now. Finally had the chance and now they are retiring! The new catalogue has just a plain sheet of sticky cuts that can be run through the Big Shot.

1. Run the Brocade Blue card stock through the Big Shot with the Texturz Plate.

2. Stamp three flowers and two leaves from the Petal Pizzazz stamp set on scraps of of Whisper White card stock. Cut out.

3. For stems of flowers, bend two narrow strips of Certainly Celery card stock keeping one straight. Using the two-way glue pen, attach strips to Brocade Blue card stock.

4. Tie white embroidery thread through clear itty bitty button. Add glue dot to back of button and adhere to Borcade Blue flower. Another option is to use a crystal brad. Adhere flower to middle stem. Here is the card with the Itty Bitty Button.

5. Add silver brad to So Saffron flower. Add dimensional to back of flower and attach to card.

6. Rub the embossing buddy over the Pretty in Pink flower. This helps get rid of the static. Add a Sticky Cut flower (from Sticky Cut Sweet package) to center of Pretty in Pink flower. Add glitter. Add dimenionals to back of flower and place on card

7. Add dimenionals to back of leaves and attach to card. Tie Certainly Celery ribbon in a knot and adhere with a glue dot.

Dimensions:

Whisper White Card Base: 5 1/2 x 6 1/2

Brocade Blue: 3 1/8 x 5 3/8

Certainly Celery: very narrow strips

Whisper White: scraps

Supplies:

Stamps: Petal Pizzazz

Paper: Whisper White, Brocade Blue, Certainly Celery

Ink: Brocade Blue, Certainly Celery, Pretty in Pink, So Saffron

Accessories: Glue Dots, Certainly Celery 1/4" Grosgrain Ribbon, Two-Way Glue Pen, Dimensionals, Silver Brads, Itty Bitty Buttons or Crystal Brad, Flower Sticky Cut (from the Sweet package), Cosmo Glitter, Texturz Plate Backrounds, Big Shot. White Embroidery Thread

3 1/4 x 5.5 card

Thanks for stopping by.